Experto Medium 5-in-1 Titanium Enhanced Blade (NEW)

NEW - Metal Tab and Switch on all Medium Blades (Lasts longer than other 5 in 1 blades)

Being a true revolution, this ultrasharp blade consists of a 440C stainless-steel lower blade and an extremely fine ceramic upper blade with ultrasophisticated titanium coating. The ceramic guarantees a low heat transfer and less friction, allowing longer and faster clipping while reducing the risk of clipper burns and preventing skin irritation. Do you want to clip thicker or woolly coats? Then this Medium 5-in-1 Titanium Enhanced Blade is perfect!
Adjustable medium blade

Thanks to the brand-new technology used to coat the ceramic with titanium, the blade will stay sharp much longer than regular blades. This way you will be able to enjoy your clipping equipment longer! The teeth of this blade are slightly further apart, allowing you to work through parts of thicker and woollier dog coats with ease. Thanks to the lever at the bottom of the blade, you can adjust and choose between 5 different clipping lengths: 0.5 mm, 1 mm, 1.5 mm, 2 mm and 3 mm.

The great thing about this blade is that it not only fits the Show Tech Experto clipper but other brands as well. It is also compatible with these Wahl Snap-on Combs. 

Do you want to create a finer finish? Then the fine blade is a better choice.

It’s all in the details

• Adjustable cutting lengths: 0.5 mm (#30), 1 mm (#15), 1.5 mm (#10), 2 mm (#9) and 3 mm (#8)
• To clip thicker and woolly dog coats
• Material upper blade: 440C stainless steel
  Material lower blade: ceramic with titanium coating
• Compatible with the Show Tech Experto, Depending on what model of Wahl It may not work well. Arco, Wahl Bravura, the Wahl Chromado, the Wahl Creativa, the Wahl Figura, the Wahl Motion and the Wahl Super Groomclippers and with these Wahl Snap-on Combs
• Width of blade: 45 mm

Use instructions

• BLADE REMOVAL
• Hold the clipper face up with one hand and press down on the teeth at the top of the blade using your thumb until the blade it is unclicked. Hold out your other hand and use it to catch the blade and to avoid dropping it.

  BLADE INSTALLATION

• Hold the clipper face down with one hand and align the bottom of the blade with the middle of the recess at the back of the clipper. Make sure that the lever at the bottom of the blade comes over the clipper. Push the centre and upper part of the blade down until it snaps into place.

  BLADE CLEANING AND OILING

• Cleaning: Press and hold the top of the blade. Use the cleaning brush to remove hair from between the upper and lower blades.  A can of compressed air also helps remove extra hair between upper and lower blades.
  Oiling: Use 1 to 2 drops of the lubricating oil on the blade starting on each side and middle of blade.  Run blade to move the oil completely over the surface.
  Note: Do not detach the blade spring while maintaining to avoid malfunctioning.